Service available now · 50 states Mon–Sun · 7AM–9PM EST

Whirlpool Dryer Steam Cycle: Tips for Better Results

TL;DR: The Whirlpool dryer steam cycle on the WED6150PW and WGD5050LW is for refreshing and de-wrinkling clothes, not for drying wet laundry. Load lightly, check care labels and follow your owner's manual for settings.

Updated Nov 6, 2026 5 min read
TL;DR: The Whirlpool dryer steam cycle on the WED6150PW and WGD5050LW is for refreshing and de-wrinkling clothes, not for drying wet laundry. Load lightly, check care labels and follow your owner's manual for settings.

The Whirlpool dryer steam cycle is meant for refreshing and de-wrinkling a load of clothes, not for drying a soaking wet one. On the WED6150PW electric dryer and the WGD5050LW gas dryer, our model pages describe Steam as a refresh cycle that sits alongside moisture sensing. Use it for a dry shirt or a few items that came out of a closet creased, and use a normal drying cycle for laundry that is actually wet.

Models with Steam on this siteWED6150PW (electric) and WGD5050LW (gas)
What the models listSteam cycle, moisture sensing, Wrinkle Shield option, AutoDry Drying System
Capacity7.0 cu ft on both
Best useRefreshing and de-wrinkling dry or nearly dry clothes
Not a fix forA dryer that takes too long to dry a load
Exact settingsPer your owner’s manual

What is the steam cycle on a Whirlpool dryer?

Whirlpool lists a Steam cycle on two dryers that we cover: the WED6150PW, an electric dryer with a 7.0 cu ft drum, and the WGD5050LW, a vented gas dryer with the same capacity. The WED6150PW page says the Steam refresh cycle and Sensor Dry moisture control are added to the standard Wrinkle Shield option. The WGD5050LW page says the Steam cycle is for refreshing and de-wrinkling loads on top of moisture-sensing gas drying. Both also list the AutoDry Drying System.

In general, a dryer steam cycle works by adding a small amount of moisture as steam during tumbling, which relaxes creases in dry fabric; what it does on your exact model, see the owner’s manual. That is all our model pages say about it. They do not give cycle times, water requirements or temperatures, and we will not make those up. For how to start the cycle, what it needs and how long it runs, follow the owner’s manual for your exact model.

When is the steam cycle the right choice?

Think of Steam as a way to freshen, not a way to dry. It fits laundry that is already dry but wrinkled, such as a shirt that sat in a drawer, a jacket you want to refresh before wearing, or clothes that came out of a packed suitcase. If the load is wet, start with a regular drying cycle, which uses moisture sensing to decide when the clothes are done.

Before using any special cycle, read the care labels. Some fabrics should not be tumbled with heat or steam, and the label always wins over a general tip. If you are unsure about a delicate piece, leave it out and let it air dry.

It also helps to think about what you are trying to achieve. If the goal is to remove a stale smell from a jacket, to relax creases in a dress shirt or to freshen a few items before a trip, the refresh cycle is the sensible tool. If the goal is to dry a full basket of towels, it is not. Matching the cycle to the job keeps the load from coming out damp, and it saves you from running the same clothes twice.

How do you get better results from the steam cycle?

A few simple habits help, and none of them depend on exact timings.

  • Do not overfill the drum. Clothes need room to tumble, and a stuffed drum leaves creases in place.
  • Load similar items together, so a heavy towel does not crowd a light shirt.
  • Shake out each item before you put it in, and close any zippers and hooks.
  • Take the clothes out when the cycle ends. Leaving them in the drum lets wrinkles set again.
  • Hang or fold promptly, because warm clothes crease easily.

Our Whirlpool dryer how-it-works guide explains the basic path of air through the drum and out the vent, which is the same for every cycle.

A hand taking a smooth warm shirt out of a clothes dryer after a cycle
Take clothes out when the cycle ends so the wrinkles do not set again.

Will the steam cycle help if the dryer takes too long?

No. A dryer that takes too long to dry a normal load almost always has restricted airflow, such as a clogged lint screen, a blocked exhaust vent or a crushed transition hose. A special cycle does not clear those. Our Whirlpool dryer takes too long guide lists the usual causes in order, and the model pages note that the most common cause of poor drying is a lint-clogged vent, not a part.

Clean the lint screen before every load and keep the exhaust path clear; our dryer maintenance and vent cleaning guide covers both. A clean path helps every cycle work as it should, steam included.

How is Steam different from the Wrinkle Shield option?

Both aim at wrinkles, but they are different features. On the WED4307SW, our page describes the Wrinkle Shield option as tumbling finished loads. We do not have more detail than that. Steam, on the models above, is described as a refresh cycle. Check your manual for how each is selected and whether the two can be combined.

What should you not do with a steam dryer?

Do not open the dryer cabinet or the panels to investigate steam, water or heat problems. That work involves the heating and electrical parts and belongs to a technician. If you notice a burning smell, scorched fabric or smoke, stop the dryer, switch off the breaker at the panel while standing on a dry floor and do not use it again until it has been checked. Do not run any dryer with a blocked vent, and do not dry items that have been soaked in flammable liquids.

On a gas model, never attempt anything involving the gas line yourself. If you smell gas, do not turn anything on or off; go outside and call your gas utility or 911 from outside.

When should you call a technician?

Call if a Steam cycle will not start, if the dryer does not heat, if clothes stay damp after a clear vent or if an error code shows. For the heat side, see Whirlpool dryer not heating. Our Whirlpool dryer repair page explains how a visit works.

Frequently asked questions
What does the steam cycle do on a Whirlpool dryer?
Our model pages for the WED6150PW and WGD5050LW describe Steam as a refresh cycle for refreshing and de-wrinkling loads. For the details of your model, check your owner’s manual.
Can I dry a wet load with the steam cycle?
Treat Steam as a refresh option and use a normal drying cycle for wet laundry.
Does the steam cycle fix a dryer that takes too long?
No. Slow drying is usually a lint-clogged vent or screen, not a missing cycle.
Which Whirlpool dryers have Steam?
On this site, the WED6150PW electric dryer and the WGD5050LW gas dryer both list a Steam cycle.
When should I call a technician?
Call if the cycle will not run, the dryer will not heat or a code appears. You can book a visit online.

Schedule Whirlpool
appliance repair

Experienced technicians in all 50 US states. Average response within 24 hours.

  • Experienced Whirlpool specialists
  • Genuine OEM parts
  • 30-day labor warranty
  • Upfront pricing
Need professional help?

Book experienced Whirlpool
appliance repair

On-site diagnostics, genuine OEM parts, 30-day labor warranty. Service in all 50 US states.