What “Small or Hollow Cubes” means on a Whirlpool ice maker (whirlpool ice maker small or hollow cubes diagnosis)
Small, hollow, or misshapen cubes from a Whirlpool ice maker are read by symptom and usually trace to water volume.
Common causes
A Whirlpool ice maker is diagnosed by symptom rather than by a fault code, so the most likely causes are worked through in order before any part is fitted.
- Low water pressure or flow
- Clogged filter
- Partly blocked fill tube
What you can check first
Work through these owner-level checks before booking service, and stop wherever mains voltage, gas, water, or a moving mechanism is involved.
- Replace the filter and verify supply pressure
- Thaw any ice in the fill tube
How a technician diagnoses it
Because a Whirlpool ice maker gives no fault code for this, an experienced technician works from the symptom to the part. They confirm the complaint at the appliance, isolate the circuit or mechanism involved, and test each suspected component against specification before condemning it — measuring resistance, checking continuity at switches, verifying water, gas, or power where relevant, and ruling out the simple causes first. That methodical approach is what separates a single-visit repair from a guessed part swap, and it is why a Small or Hollow Cubes on a ice maker is read by behaviour rather than by a screen.
When to call a technician
This condition is rated Low severity. If it persists after the checks above, an experienced, independent technician should diagnose it at the named part and fit a genuine OEM replacement. As an independent service we are not affiliated with Whirlpool Corporation; our workmanship carries a 30-day labor warranty and pricing starts from a clear trip-and-diagnostic fee, never a fixed price unseen. Have your ice maker model and serial number ready when you book, and the right part for your exact build can be matched before the visit.
Preventing it in future
A little routine care keeps a Whirlpool ice maker out of trouble: keep it clean, give it the airflow and clearances it was designed for, address small changes in performance early rather than after a failure, and use only genuine OEM parts when something does wear out. Catching a Small or Hollow Cubes while it is still minor is almost always cheaper than waiting for a related part to fail, and it keeps the appliance performing the way it was built to.
Related help and Whirlpool resources
Book Whirlpool ice maker repair, browse our ice maker diagnostics and step-by-step repair guides, find your area on the locations page, or schedule service. For specifications and model lookup, visit whirlpool.com.
